Common Ferris Lawn Mower Problems and How to Solve Them

Some of the links in this article may contain affiliate links, for which we earn a commission at no additional cost to you. By using our website, you hereby consent to our privacy disclaimer and agree to its terms.​

Table of Contents

Mowing the lawn is one of summer’s greatest joys. But when your Ferris Lawn Mower isn’t running as it should, that joy can quickly turn to frustration. Don’t worry! I’m here to help you troubleshoot and solve common issues with Ferris Lawn Mowers so you can get back to enjoying a lush green lawn in no time.

In this article, we’ll cover some of the most common problems faced by Ferris mower owners, from difficult starts to clogged chutes. We’ll also discuss how these issues can be easily resolved without having to call for professional assistance.

So if you’re looking for advice on keeping your Ferris mower running smoothly all summer long, look no further–you’ve come to the right place!

Troubleshooting Difficult Starts

When you’re dealing with difficult starts on your Ferris lawn mower, the first thing to check is the spark plugs. A lot of times, it’s just a matter of adjusting them and getting them running again.

If that doesn’t solve your problem, then it could be time for a new battery. Replacing your battery can often get you up and going in no time – plus, it gives you peace of mind knowing that your machine is reliable when you need it most.

Another possible cause of difficult starts could be an issue with the fuel system or carburetor. An experienced technician should be able to diagnose any problems here quickly and recommend a course of action so that you can get back out there cutting grass as soon as possible.

With proper maintenance and care, your Ferris lawn mower will continue to provide years of service for all your outdoor needs!

Checking The Fuel System

Now that we’ve gone over the basics of troubleshooting difficult starts, let’s move on to checking the fuel system. This process is important for diagnosing problems in your lawnmower and should not be skipped during routine maintenance.

First, you’ll want to check all of the fuel lines for any clogs or leaks. Make sure none of them have been damaged from exposure to sun, heat, or other elements. If they look worn out or cracked at all, replace them immediately.

Next, it would be wise to replace the old gas with fresh gasoline if possible; this will help ensure smooth running and reliable performance in your mower.

Finally, make sure all the connections are properly tightened so that no air or fuel can escape while operating your machine. By following these tips and performing regular maintenance checks on your lawnmower, you’ll avoid most common ferris lawn mower issues down the line!

Cleaning The Air Filter

Let’s get started by talking about cleaning the air filter – it’s an important part of keeping your lawn mower in top shape. After that, we’ll check the condition of the air filter and make sure it’s ready for use.

Cleaning The Air Filter

When it comes to lawn mower maintenance, one of the most important tasks is cleaning your air filter. Without a clean air filter, your engine won’t be able to run properly, which can cause more serious problems down the line.

It’s essential you know how to adjust tension and replace belts when necessary – something that can’t be done if you don’t clean the air filter regularly.

The first thing to do is remove the air filter cover and carefully take out the filter itself. You’ll want to use compressed air or even an old toothbrush to get rid of any dirt or debris before putting everything back in place.

Once you’ve replaced the filter and adjusted tensions as needed, your mower should be ready for action again!

Checking Air Filter Condition

Once you have the air filter removed, it’s important to check its condition.

If you’re not sure how old your filter is or if it needs replacing, look for signs of wear and tear – frayed edges, cracks in the material, etc.

You may also be able to tell by comparing the color of the filter with a new one.

If there are any problems at all, replace it right away before putting everything back together.

Adjusting tension and replacing parts as necessary will ensure that your mower runs smoothly and efficiently for years to come.

So don’t forget to take care of this essential maintenance task!

Unclogging The Chute

As a lawn mower technician, it’s important to make sure that the machine is functioning properly and safely. Checking all of the safety features on the ferris lawn mower before making repairs is essential—and this includes unclogging the chute.

Sometimes debris can get lodged in the chute and cause an issue with grass clippings not being able to exit properly. To avoid this problem, start by adjusting the speed of your blades. If you’re going too fast, then more clumps will form and block up the chute faster than usual.

Then check for any obstructions that may be blocking the path or preventing proper airflow so that clippings are ejected efficiently. Once everything looks clear, use a small brush or vacuum to fully clean out any remaining material from inside the chute area.

This should help keep your ferris lawn mower running smoothly without any further issues!

Inspecting The Blades

Now that the chute is unclogged, it’s time to inspect the blades. This step typically requires some disassembly of your lawn mower depending on its model, so proceed with caution and make sure you have a clear understanding of what needs to be done before getting started.

The blades should first be checked for any visible damage or wear and tear. If needed, they can then be sharpened using a file or blade balancer.

The tension should also be adjusted if necessary; this is usually done by turning an adjustment bolt located near the cutting deck. Make sure all bolts are securely tightened after adjusting them, as loose ones can cause vibrations in the handlebars during operation.

With these steps complete, your machine should be ready to go!


So, there you have it! Those are some of the most common Ferris lawn mower problems and how to solve them.

It can be tricky trying to troubleshoot all these different issues, but if you take your time and follow a few simple steps, you’ll get your mower running in no time.

If I could give one piece of advice when it comes to maintaining your Ferris lawn mower, it would be this: check up on it regularly.

Make sure the air filter is clean, that fuel isn’t clogging anything up, that blades are sharpened and ready for use.

Taking preventative measures will save you a lot of headaches down the line.

Finally, don’t forget to call us at our shop if any major problems arise with your Ferris lawn mower – we’ll help diagnose what went wrong and work out a solution quickly so that you can get back outside and enjoy cutting your grass again soon!

Want to step up your gardening game?

Bi-Weekly emails, with only the best recipes.

Want to step up your gardening game?

Bi-Weekly emails, with only the best recipes.